Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1841 User access verification

Guys i get this msg and when i type the passord its not getting in, is there any way to reset this password..

3 REPLIES
Hall of Fame Super Silver

Re: 1841 User access verification

Shankar

To recover from this situation you need the password recovery procedure. This link will provide the information that you need to do this:

http://www.cisco.com/en/US/products/hw/routers/ps221/products_password_recovery09186a0080094773.shtml

HTH

Rick

New Member

Re: 1841 User access verification

Thanks Rick, i tried it i got the same error

User Access Verification

Password:

*Sep 29 04:33:45.339: %IP-4-DUPADDR: Duplicate address 125.17.17.49 on FastEther

net0/0, sourced by 0012.018c.4580

Hall of Fame Super Silver

Re: 1841 User access verification

Shankar

I thought that your original post was describing a problem where you were not able to login using the password that you have got. That is why I suggested the password recovery procedure. This next posting indicates a significantly different problem. The problem is that some device on that subnet is using the same address as your router interface. I can think of 2 possibilities of how to resolve this problem:

- probably the best solution is to find the device that is using the IP address (its MAC address is 0012.018c.4580) and get that device reconfigured. If the router is connected to a managed switch you may be able to login to the switch and to check its mac-address-table (or CAM) to locate the port where this MAC address is connected. This will help identify what device it is.

- you might be able to disconnect the FastEthernet0/0 interface, login to the router, and configure the interface with a different address.

HTH

Rick

2429
Views
0
Helpful
3
Replies