01-25-2007 02:06 AM - edited 03-03-2019 03:29 PM
what do you think about a 1841 with 4 x 2Mbps links (2 x WIC-2T)?
01-25-2007 02:19 AM
hi,
1841 have two modular slots for WAN access.WIC-2T is also supported. Please go through the data sheet on following link :
http://www.cisco.com/en/US/products/ps5853/products_data_sheet0900aecd8016a59b.html
Please rate if found helpful.
Thanks
Karunakar
01-25-2007 03:30 AM
my question is if the CPU can work with 4 x 2Mbps.
The slots are there, but can the hardware do the job?
The QPguide says the 1841 works with speeds up to 2M.
01-25-2007 03:51 AM
Can you elaborate the words written in QP guide ? This does not mean that you will not get throughput of 8 mbps. This router also support Fast ethernet, it does not mean that it will restrict the total traffic to 2 mbps. It may be the speed of bus.
Please rate if you find it helpful.
thanks
01-25-2007 03:58 AM
Exact words:
"Cisco 1841: Secure data access solution for customer environments up to T1/E1/xDSL WAN rates with services turned on"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide