Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

1841 with 2 x WIC-2T

what do you think about a 1841 with 4 x 2Mbps links (2 x WIC-2T)?

4 REPLIES
New Member

Re: 1841 with 2 x WIC-2T

hi,

1841 have two modular slots for WAN access.WIC-2T is also supported. Please go through the data sheet on following link :

http://www.cisco.com/en/US/products/ps5853/products_data_sheet0900aecd8016a59b.html

Please rate if found helpful.

Thanks

Karunakar

New Member

Re: 1841 with 2 x WIC-2T

my question is if the CPU can work with 4 x 2Mbps.

The slots are there, but can the hardware do the job?

The QPguide says the 1841 works with speeds up to 2M.

New Member

Re: 1841 with 2 x WIC-2T

Can you elaborate the words written in QP guide ? This does not mean that you will not get throughput of 8 mbps. This router also support Fast ethernet, it does not mean that it will restrict the total traffic to 2 mbps. It may be the speed of bus.

Please rate if you find it helpful.

thanks

New Member

Re: 1841 with 2 x WIC-2T

Exact words:

"Cisco 1841: Secure data access solution for customer environments up to T1/E1/xDSL WAN rates with services turned on"

1987
Views
0
Helpful
4
Replies