Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1900 Series Router PPPoE Support

We are considering upgrade of our 1800 series integrated services router to a 1900 series.  We have port FE1 on our 1812 configured as a WAN interface using PPPoE to a typical cable modem.  Can one of the standard Ethernet ports on the 1941 be configured the same way, or do we need to buy a WAN interface module?  If so what type?  Thanks!

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: 1900 Series Router PPPoE Support

As mentioned above, identically except naming.

Please remember to rate useful post clicking on the stars below.

4 REPLIES
Hall of Fame Super Gold

Re: 1900 Series Router PPPoE Support

No, just use an identical configuration.

New Member

Re: 1900 Series Router PPPoE Support

So are you saying that the two gigabit Ethernet ports that come standard on the 1941 can be configured in a similar manner to the first two ports (FE0 and FE1) on the 1812?  Thanks.

Hall of Fame Super Gold

Re: 1900 Series Router PPPoE Support

As mentioned above, identically except naming.

Please remember to rate useful post clicking on the stars below.

New Member

Re: 1900 Series Router PPPoE Support

Thanks!  I will give it a try.

1438
Views
0
Helpful
4
Replies
CreatePlease to create content