2 dialer strings with multiple bri possible ?

[shiva_ial]

i have 2 (64kbps) isdn links with 2 dialer strings

i want to connect the remote site at 128 kbps is it possible? if possible config pls

i tried creating a dialer interface and included in pool membership, but it doesnt worked, in article i was said

if i put dialer string 1333223

dialer string 1464313

it will pick only first number, if first fails second will be considered

i want to use two strings with dialer interface ?

any config or tips to do that

[srimural]

Hi,

You have to specify the dial order. Please try teh following example.

interface Dialer0

ip address 10.1.1.130 255.255.255.0

encapsulation ppp

dialer pool 1

dialer string 1904

dialer string 1905

dialer-group 1

dialer order round-robin

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t8/ftrotdls.htm

I think it help a little.

Thanks and Regards,

Srinath.M

Cable&Wireless

[shiva_ial]

will allow only one string to be used

i need to use both the strings at the same time

is it possible ?

[spremkumar]

Hi Shiva

As you have pointed out in your earlier mail by defining 2 dialer strings will help only when the first defined dialer string is unavailable...

Have you tried defining 2 dialers instead and assigning induvidual dialer strings onto them ?

regds

[shiva_ial]

i tried it is picking only the first dialer string

[amit_kulshrestha_2]

Try using this,it will keep both dial string up,kindly rate it.

interface Dialer0

ip address 10.1.1.130 255.255.255.0

encapsulation ppp

dialer pool 1

dialer load-threshold 128 either

dialer string 1904

dialer string 1905

dialer-group 1

dialer order round-robin