Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

2 Questions about VRF-Lite

Hello,

it's the first time i have to work with VRF and I have a couple of questions about VRF configuration.

1. I have two VRF (one for public addressing and another for private addressing mainly for management) and a shared Internet connection. I can configure 3 VRF (public, management and Internet) but for inter-VRF routing I must configure BGP. Other solution could be to use 2 VRF and let Internet connectivity out of any VRF. In this last case, it seems that I could use static routing for VRF-not_VRF routing. Is that true?

http://www.cisco.com/en/US/tech/tk436/tk832/technologies_configuration_example09186a0080231a3e.shtml

2. I have an interface with two IP addresses and I would like one IP address to be inside one VRF and another IP address to be inside other VRF. I think this is not possible with VRF-Lite...

Thanks in advance,

Christian

Everyone's tags (3)
1 REPLY
Hall of Fame Super Bronze

2 Questions about VRF-Lite

1) Correct, per example you provided

2) Correct, you could use VRF Select but it requires full MPLS VPN

http://www.cisco.com/en/US/docs/ios/12_2/12_2sz/feature/guide/122szvrf.html

Regards,

Edison

428
Views
0
Helpful
1
Replies