i have a single 2811 with 2 wan links first one is E1 on E1 controller and the second links is through a DSL modem to one of the ethernet ports on 2811. these 2 wan links are from 2 different ISPs. i have a webserver on my private network. what i want to acheieve is traffic for the webserver entering 2811 using E1 should be responded using the E1. And traffic entering 2811 through dsl for webserver should be responded by the same DSL link. this is something called symmetric routing. can anyone help? thnaks in advance
when i try to issue another nat command for the same web server but from the 2nd wan link the first nat gets replaced.
if a client is accessing the webserver uding the ip from wan link A and my default gateway is set to wan link B. the web page is not displayed to client.
I have a very basic issue that i am experiencing these days. i have studied that tcp connection are end to end ::::meaning that tcp connection are between end systems and they do not rely/depend on the intermediate routes and links. but this is not happening. if a tcp connection request is coming from wan link A and my default gateway is set to wan link B, tcp connection does not form.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...