Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2500 series cisco router

when im booting 2500 series router,im going to following boot mode.

CVLFBD(boot)#

i changed confreg plus reload

im going to that same mode

how to resolve this?

3 REPLIES
Hall of Fame Super Gold

Re: 2500 series cisco router

Check boot process, reload image as needed.

Cisco Employee

Re: 2500 series cisco router

Hi,

Your router is apparently running in so-called BootROM mode. It is a crippled IOS stored in the router's ROM. This IOS is started when the full IOS in the FLASH is erased or corrupted, or if the configuration register is set to an incorrect value.

Check the configuration register value - it should be set to 0x2102. Also, check using the show flash command if the IOS is stored in your FLASH. If it is not, it is necessary to store it there using TFTP.

Best regards,

Peter

New Member

Re: 2500 series cisco router

Search the Cisco web site for this procedure

Flash Upgrade for Cisco 2500

follow the instructions exactly.

Make sure that you can ping your TFTP server and save your original IOS file before erasing the memory.

644
Views
0
Helpful
3
Replies