Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2611XM - Cookie Information is corrupt

"WARNING: Cookie information is corrupt"

loadprog: error - Invalid image for platform

e_machine= xx , cpu_type = xx

Cannot load "Flash:"

Does anyone have Cisco 2611XM router and can send me a "show cookie" from ROMmon?

I need to input new cookie information in my router.

4 REPLIES
Silver

Re: 2611XM - Cookie Information is corrupt

This error message means the software image on the flash memory is not for a 2600 router.

Let the router go into ROMMON, then do a TFTPDNLD to load a new image into the router. Refer here for details -

http://www.cisco.com/warp/customer/471/76.html

This should fix the problem.

New Member

Re: 2611XM - Cookie Information is corrupt

This is not the case. When I issue command "show cookie" all fields are 00 00 00 00. That means that router cpu, interface, mac-address are erased. I need to input this information in a router (memory).

New Member

Re: 2611XM - Cookie Information is corrupt

System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

Copyright (c) 2003 by cisco Systems, Inc.

ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???ş???|?C?|ˆ?|?C?

loadprog: error - Invalid image for platform

e_machine = 43, cpu_type = 115

boot: cannot load "flash:"

rommon 1 > cookie

cookie:

ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

rommon 2 > priv

Password:

I need password to enter privilege rommon mode and input new cookie information.

Hall of Fame Super Gold

Re: 2611XM - Cookie Information is corrupt

Hi, look at this link for rommon cookie recovery:

http://www.tech-recipes.com/cisco_router_tips982.html

Hope this helps, if please rate post!

245
Views
5
Helpful
4
Replies