Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2611XM + VWIC2-2MFT-T1/E1

Hi there !

I have a 2611XM in a branch, with some gateways (only 8 ports)... I'd like to change it to a E1 .. how can I check if this router supports this interface ?

I looked for this router in Cisco Configuration Tool.. but it's not there ...

Any help ?

Thanks.

Andrei.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Silver

Re: 2611XM + VWIC2-2MFT-T1/E1

Re: 2611XM + VWIC2-2MFT-T1/E1

It's usually easier to look up the card and see if it's supported in the router. Here's the data sheet for the VWIC (it is supported w/IOS 12.3(14)T).

http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8028d2db.html

Hope that helps.

2 REPLIES
Silver

Re: 2611XM + VWIC2-2MFT-T1/E1

Re: 2611XM + VWIC2-2MFT-T1/E1

It's usually easier to look up the card and see if it's supported in the router. Here's the data sheet for the VWIC (it is supported w/IOS 12.3(14)T).

http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8028d2db.html

Hope that helps.

313
Views
0
Helpful
2
Replies