Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2620 high cpu

Hi gang,

Ive been having issues with high cpu usage on 2620 routers. my highest user of cpu is the IP input process according to: sh proc cpu | exclude 0.00%__0.00%__0.00%. However, at the time when the cpu spikes over 80% the packets per second drop down to the lowest they ever are. this router is doing nat/dhcp. 2 vlan subints off the faste, and some basic Voip QoS. I can post the running if need be... but before i do, any ideas?

1 REPLY

Re: 2620 high cpu

Hi

Do revert back how many links are getting terminated onto this router and the bandwidth capacities.

Also confirm whether CEF is enabled globally on this router..

You can try enabling ip route-cache flow under your lan interface and make use show ip cache flow to check what kinda traffic patterns are being processed by your router...

The output of this show command will give u the source/dest ip address as well as port numbers(hex) which you can easily decrypt and identify the root cause.

regds

134
Views
0
Helpful
1
Replies