Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

2621XM fips 140-2 compliant ios image

I need to setup a fips 140-2 compliant tunnel. We have a 2621XM which is on the list of compliant devices. But, the required ios image 12.3(3d) is no lonager available.

Any suggestions on how I could obtain this specific firmware version?

3 REPLIES
Hall of Fame Super Gold

Re: 2621XM fips 140-2 firmware

First of all is IOS is fully fledged software, not firmware.

Then, I understand the FIPS certification process has provision for which within the legal framework newer version from manufacturer can be used and is certified as well.

Last, not sure the performances you need, but without an hardware module, do not expect much from an old 2921XM really.

New Member

Re: 2621XM fips 140-2 firmware

Sorry firmware is the wrong term, I should have used image. My device does have the AIM-VPN/EP card in it.

In section 3.2 of the Security Policy associated with the "2621XM and 2651XM Modular Access Routers with AIM-VPN/EP" it states "IOS version 12.3(3d) is the only allowable image; no other image may be loaded."

I have been searching FIPS 140-2 for something about software upgrades, but have not found anything yet.

Hall of Fame Super Gold

Re: 2621XM fips 140-2 firmware

Then my understanding of FIPS provisions is wrong, sorry for the confusion.

364
Views
0
Helpful
3
Replies
CreatePlease to create content