Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

2801 IOS Upgrade

Thought IOS would be easy but not to be on this one.

Issued the command copy tftp flash command from exec mode. It asked for tftp ip, source file and destination file. The copy went fine.

Then to check whether the ios has been copied to flash. I entered the command show flash, but the new image is not found there.

Then again I repeated the procedure, it then says file already exists with file name, do you want to overwrite. answered yes.

Is there something I am missing here??

  • WAN Routing and Switching
2 REPLIES

Re: 2801 IOS Upgrade

Hi Saba

Can you post the output of the command show flash ?

regds

New Member

Re: 2801 IOS Upgrade

Hi,

It seems you are missing out on the filename.

Check with the filename. As everything seems to be fine, you are coyping it properly and rest...

HTH

293
Views
0
Helpful
2
Replies
This widget could not be displayed.