Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

2811 can it support BRI and PRI cards at the same time

I wish to use a VWIC2-2MFT-T1/E1 and a VIC2-2BRI-NT/TE in a 2811 -can they co -operate at the same time - ??????

3 REPLIES
Hall of Fame Super Gold

2811 can it support BRI and PRI cards at the same time

Yes.

New Member

2811 can it support BRI and PRI cards at the same time

http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/inst_ic.html

A note amongst the installation instructions states the following: Do not install an ISDN BRI WAN interface card or an ISDN BRI network module in the same chassis as an ISDN PRI network module.

Hall of Fame Super Gold

2811 can it support BRI and PRI cards at the same time

bradvanner wrote:

http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/inst_ic.html

A note amongst the installation instructions states the following: Do not install an ISDN BRI WAN interface card or an ISDN BRI network module in the same chassis as an ISDN PRI network module.

That is incorrect, as it is a supported configuration, and it works just fine.

In these case you can use the feedback form on the left for the documenation to be fixed.,

353
Views
0
Helpful
3
Replies