Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

2811 Router

looking for command line to format the compact flash on a 2811. perform format flash: - volume ID ?

1 REPLY
Cisco Employee

Re: 2811 Router

You have to first check whether the Compact Flash is a Type B or Type C file system and use the command " erase flash:" or "format flash:". Please see the link below for identifying and formatting the flash:

http://www.cisco.com/en/US/products/ps5854/prod_troubleshooting_guide09186a00802c35d3.html#wp38723

HTH,Please rate if it does.

-amit singh

122
Views
5
Helpful
1
Replies
CreatePlease to create content