Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2811 support NM-8E1-IMA?

Does 2811 supports NM-8E1-IMA card? I have 2621 router with this card in use and I'd like to get 2811 and put this same card in it. Is it possible?

thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Re: 2811 support NM-8E1-IMA?

Hello,

unfortunately, the NM-8E1-IMA card is not supported on the 2811.

Check this link and scroll down to Table 3:

Table 3. Network Modules Not Supported by Cisco 2811, Cisco 2821, and Cisco 2851 Routers

http://www.cisco.com/en/US/products/ps5854/products_qanda_item0900aecd80169bd6.shtml

Regards,

GP

2 REPLIES
VIP Purple

Re: 2811 support NM-8E1-IMA?

Hello,

unfortunately, the NM-8E1-IMA card is not supported on the 2811.

Check this link and scroll down to Table 3:

Table 3. Network Modules Not Supported by Cisco 2811, Cisco 2821, and Cisco 2851 Routers

http://www.cisco.com/en/US/products/ps5854/products_qanda_item0900aecd80169bd6.shtml

Regards,

GP

New Member

Re: 2811 support NM-8E1-IMA?

thanks!

163
Views
0
Helpful
2
Replies
CreatePlease login to create content