Yes, this image can be used on 2811 router and contains support for BGP. Please be aware that this image requires 256MB of RAM and 64MB of FLASH.
Also, this image is quite outdated so if you have an option of using a more recent version I would suggest doing it. The latest 12.4T release for your router is 12.4(24)T6, however, that requires 128 MB of FLASH. RAM requirements have not changed.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...