04-24-2007 11:43 PM - edited 03-03-2019 04:42 PM
Dear All,
2821 routing is rebooting with the following message.
Intializing memory for ECC...
The above message is coming continuously instead of booting the router with IOS image (12.4 13a)
What could be the problem ?
I ahev formatted the flash and loaded new Image and removed all the modules from router , i rebooted the router but no luck...
Any help would be appreciated.
Thanks,
Satish
04-25-2007 12:47 AM
Hi Satish
Can you try reseating your Memory Module and check ?
regds
04-26-2007 08:08 PM
Hi ,
Thanks for your reply.I already done it but no luck...I also changed the module and inserted in another memoru module...but no use..
Thanks,
Satish
04-26-2007 11:24 PM
Better to raise an RMA with cisco if under a valid contract
Narayan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide