Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2851 and NM-HDV2 modules

Hello all,

I have plugged a NM-HDV2-2 T1/E1 on slot1 on a 2851 router.

IOS does not recognize, it tells me that there is a "unknown" module. My IOS is SPServices 12.4

Any help?

Thanks

6 REPLIES
Hall of Fame Super Gold

Re: 2851 and NM-HDV2 modules

My IOS is SPServices 12.4

This is information is not complete.  You need to use the "T" train.

Please don't forget to rate useful posts.  Thanks.

New Member

Re: 2851 and NM-HDV2 modules

Sorry,

More detail about the version:

Cisco IOS Software, 2800 Software (C2800NM-SPSERVICESK9-M), Version 12.4(22)T4, RELEASE SOFTWARE (fc2)

Cisco Employee

Re: 2851 and NM-HDV2 modules

Hello,

Can you please post the output of "show diag" from the router here?

Regards,

NT

New Member

Re: 2851 and NM-HDV2 modules

Hello,

Now I can not get the show diag, but before I runned it and in module 1 (where it was plugged) it said something like "unknown module". I will update with the result may be in some hours.

Also I tried to plug into Module 2, but, strange, it didn´t fit.

Thanks for your help.

Cisco Employee

Re: 2851 and NM-HDV2 modules

Hello,

Per the following link, this card was first supported in 12.3T code so you should already have support for it in 12.4(22)T4 -

http://www.cisco.com/en/US/partner/tech/tk652/tk653/technologies_tech_note09186a008039c333.shtml#PlatformSup

I presume that you are powering the box down, installing the card, and then powering it back up.  Are you seeing any errors with regard to this module on boot-up?

Brandon

New Member

Re: 2851 and NM-HDV2 modules

Hello,

It is strange how was solved. Tried to unplug and plug the module several times (of course, with the 2851 powered of). Then, as I had not result plugged it in another 2851 and worked. Then, in the first 2851 and ... worked.

Thanks all for your help.

341
Views
6
Helpful
6
Replies