Hi I have a 2851 router and I would like to upgrade my T1 to T3. I was told that NM-1T3/E3 T3 card will work with the 2851 router but not to the fullest capability because this router does not support this kinds of speed. I have a 3600 router that does support this card but this router is not used since it was replaced with the 2851. I just thought that since the 2851 is newer it should work since 3600 is an older router. I just want to confirm with an expert on how much capability (speed) will be sacrificed with the NM-1T3/E3 card. Any help is greatly appriciated. Thanks
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...