I have around 7 out of around 15 2940 that the management interface seems to hang. Traffice still passes, but you can't ping the management IP nor can you ping from the switch. All the interface are up up and even if I do a shut and no shut on the management interface (vlan 1) or on the gig uplink port, I still can't ping the management IP. The only way I get this to work is to reboot the switch. None of the ports goes into err disable so I don't know what is going on. Can someone give me some advice on this. Thanks.
It seems to be some cosmetic issue with switch s/w. It could be a software issue.Try to upgrade the software on the switch and if there is any cosmetic issue with the software, it will take care of it.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...