Hi,
To run a PoE switch module on the 2951, am I going to need more than the standard one power supply? The documentation is a little fuzzy on this.
Router#sh ver
Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.2(1)T2, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Sun 19-Feb-12 01:53 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M13, RELEASE SOFTWARE (fc1)
Router uptime is 23 minutes
System returned to ROM by reload at 09:48:33 $time_z Fri Aug 3 2012
System restarted at 13:50:24 UTC Fri Aug 3 2012
System image file is "flash0:c2951-universalk9-mz.SPA.152-1.T2.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. B
Aug 3 14:13:46.944: %SYS-5-CONFIG_I: Configured from console by consoley using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco CISCO2951/K9 (revision 1.1) with 481280K/43008K bytes of memory.
Processor board ID FTX1630AHPX
3 Gigabit Ethernet interfaces
2 terminal lines
2 Virtual Private Network (VPN) Modules
1 cisco ISM Crypto Engine(s)
DRAM configuration is 72 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 CISCO2951/K9 FTX1630AHPX
Technology Package License Information for Module:'c2951'
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
uc None None None
data None None None
Configuration register is 0x2102
Thanks, Pat.
