Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3 e1s link for load balancing using voip

Dear all,

I have the follow problem, I have to AS5400 that it is used for Voip services and I am using one serial of one of them to connect internet over a e1 data link. Now I am adding two more e1s. So I need to load balance all 3 links.

So I want to add 2 e1s in a machine and 1 in the other. my doubt is how can I load balance them?

I was thinking about using EIGRP between them and CEF to the Data links.

is there anyone with expirience on this?

Thanks

1 REPLY
VIP Purple

Re: 3 e1s link for load balancing using voip

Hello,

you might want to have a look at Multichassis Multilink PPP, where basically, your three interfaces (on two different routers) are placed in a stack group. Have a look at the document below:

Multichasis Multilink PPP

Async, Serial, and Other Non-Dialer Interfaces

http://www.cisco.com/warp/public/131/6.html#async

HTH,

GP

92
Views
0
Helpful
1
Replies