06-15-2006 09:27 PM - edited 03-03-2019 01:01 PM
hi guys, i have upgrade my IOS, but when i reload my switch. It doesn't run the upgraded IOS....
Switch#copy tftp: flash:
Address or name of remote host []? 10.1.1.10
Source filename []? c3500xl-c3h2s-mz.120-5.WC15.bin
Destination filename [c3500xl-c3h2s-mz.120-5.WC15.bin]?
Accessing tftp://10.1.1.10/c3500xl-c3h2s-mz.120-5.WC15.bin...
Loading c3500xl-c3h2s-mz.120-5.WC15.bin from 10.1.1.10 (via VLAN1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[OK - 1811155 bytes]
1811155 bytes copied in 53.325 secs (34172 bytes/sec)
Switch#sh fl
Switch#sh flash: ?
| Output modifiers
<cr>
Switch#sh flash:
Directory of flash:/
2 drwx 704 Mar 01 1993 00:04:54 html
4 -rwx 109 Mar 01 1993 00:03:26 info
5 -rwx 1811155 Mar 01 1993 00:16:35 c3500xl-c3h2s-mz.120-5.WC15.bin
16 -rwx 109 Mar 01 1993 00:04:54 info.ver
17 -rwx 94375 Mar 01 1993 00:05:10 c3500XL-hdiag-mz-120.5.3.WC.1
18 -rwx 355 Jan 01 1970 00:00:09 env_vars
20 -rwx 1516 Mar 01 1993 00:09:26 vlan.dat
21 -rwx 1399 Mar 01 1993 00:08:22 config.text
----------------------------------------
When i reload......
switch: ?
? -- Present list of available commands
boot -- Load and boot an executable image
cat -- Concatenate (type) file(s)
copy -- Copy a file
delete -- Delete file(s)
dir -- List files in directories
flash_init -- Initialize flash filesystem(s)
format -- Format a filesystem
fsck -- Check filesystem consistency
help -- Present list of available commands
load_helper -- Load and initialize a helper image
memory -- Present memory heap utilization information
mkdir -- Create dir(s)
more -- Concatenate (display) file(s)
rename -- Rename a file
reset -- Reset the system
rmdir -- Delete empty dir(s)
set -- Set or display environment variables
set_param -- Set system parameters in flash
sleep -- Sleep a specified number of seconds
trap -- Cause a software breakpoint to occur
type -- Concatenate (type) file(s)
unset -- Unset one or more environment variables
version -- Display boot loader version
06-15-2006 09:28 PM
the switch still point to the old IOS... what can i do ??
switch: boot
Loading "flash:c3500XL-c3h2s-mz.120-5.WC3b.bin"...flash:c3500XL-c3h2s-mz.120-5.WC3b.bin: no such file or directory
Error loading "flash:c3500XL-c3h2s-mz.120-5.WC3b.bin"
Interrupt within 5 seconds to abort boot process.
Boot process failed...
switch:
06-15-2006 09:37 PM
switch: boot flash:c3500xl-c3h2s-mz.120-5.WC15.bin
Loading "flash:c3500xl-c3h2s-mz.120-5.WC15.bin"...##################################################################################################################################################################################
Thanks
06-15-2006 10:53 PM
Hi
Once it boots up properly are you able to logon to the switch ?
if yes once you are logged on change the boot variable pointing the new ios code file after removing the old boot statement which might be pointing the old ios code.
regds
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide