Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

3500 cannot boot !?

hi guys, i have upgrade my IOS, but when i reload my switch. It doesn't run the upgraded IOS....

Switch#copy tftp: flash:

Address or name of remote host []? 10.1.1.10

Source filename []? c3500xl-c3h2s-mz.120-5.WC15.bin

Destination filename [c3500xl-c3h2s-mz.120-5.WC15.bin]?

Accessing tftp://10.1.1.10/c3500xl-c3h2s-mz.120-5.WC15.bin...

Loading c3500xl-c3h2s-mz.120-5.WC15.bin from 10.1.1.10 (via VLAN1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[OK - 1811155 bytes]

1811155 bytes copied in 53.325 secs (34172 bytes/sec)

Switch#sh fl

Switch#sh flash: ?

| Output modifiers

<cr>

Switch#sh flash:

Directory of flash:/

2 drwx 704 Mar 01 1993 00:04:54 html

4 -rwx 109 Mar 01 1993 00:03:26 info

5 -rwx 1811155 Mar 01 1993 00:16:35 c3500xl-c3h2s-mz.120-5.WC15.bin

16 -rwx 109 Mar 01 1993 00:04:54 info.ver

17 -rwx 94375 Mar 01 1993 00:05:10 c3500XL-hdiag-mz-120.5.3.WC.1

18 -rwx 355 Jan 01 1970 00:00:09 env_vars

20 -rwx 1516 Mar 01 1993 00:09:26 vlan.dat

21 -rwx 1399 Mar 01 1993 00:08:22 config.text

----------------------------------------

When i reload......

switch: ?

? -- Present list of available commands

boot -- Load and boot an executable image

cat -- Concatenate (type) file(s)

copy -- Copy a file

delete -- Delete file(s)

dir -- List files in directories

flash_init -- Initialize flash filesystem(s)

format -- Format a filesystem

fsck -- Check filesystem consistency

help -- Present list of available commands

load_helper -- Load and initialize a helper image

memory -- Present memory heap utilization information

mkdir -- Create dir(s)

more -- Concatenate (display) file(s)

rename -- Rename a file

reset -- Reset the system

rmdir -- Delete empty dir(s)

set -- Set or display environment variables

set_param -- Set system parameters in flash

sleep -- Sleep a specified number of seconds

trap -- Cause a software breakpoint to occur

type -- Concatenate (type) file(s)

unset -- Unset one or more environment variables

version -- Display boot loader version

3 REPLIES
New Member

Re: 3500 cannot boot !?

the switch still point to the old IOS... what can i do ??

switch: boot

Loading "flash:c3500XL-c3h2s-mz.120-5.WC3b.bin"...flash:c3500XL-c3h2s-mz.120-5.WC3b.bin: no such file or directory

Error loading "flash:c3500XL-c3h2s-mz.120-5.WC3b.bin"

Interrupt within 5 seconds to abort boot process.

Boot process failed...

switch:

New Member

Re: 3500 cannot boot !?

switch: boot flash:c3500xl-c3h2s-mz.120-5.WC15.bin

Loading "flash:c3500xl-c3h2s-mz.120-5.WC15.bin"...##################################################################################################################################################################################

Thanks

Re: 3500 cannot boot !?

Hi

Once it boots up properly are you able to logon to the switch ?

if yes once you are logged on change the boot variable pointing the new ios code file after removing the old boot statement which might be pointing the old ios code.

regds

248
Views
0
Helpful
3
Replies