Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

3508 to 3548 errors

i've got excessive errors on my Gbit link between ports on a 3508 and 3548.

3508 0/6 - Received 20356 broadcasts, 0 runts, 0 giants, 0 throttles 897 input errors, 897 CRC, 0 frame, 0 overrun, 0 ignored

3548 0/1 - Received 56604 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 18161 multicast, 0 pause input 4754213 packets output, 2912618309 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets

I've replaced both GBic's, moved the link on the 3508 from 0/7 to 0/6 and the errors follow the port. I have replaced 1000BaseT crossover a few times, but still get errors. Any ideas?

1 REPLY
Bronze

Re: 3508 to 3548 errors

Error frames can affect connectivity, and errors such as excessive collisions, CRC errors, and alignment and jabber errors are monitored for a link-fault indication.

98
Views
0
Helpful
1
Replies
CreatePlease to create content