Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

3560 PoE enabled switch

Can you please confirm the operation of 8 port Cisco 3560 PoE enabled switch.

1> I want to run BGP protocol on this

2> I will connect two firewall on two diff port (Normal RJ45 without PoE enabled)

3> I don't require PoE , Can I disable PoE

Please confirm whether I do all the above things or not

1 ACCEPTED SOLUTION

Accepted Solutions

Re: 3560 PoE enabled switch

Here are the answers inline

1) Yes you can use BGP. You must run either IP services or advanced IP services IOS.

2) Shouldn't be a problem depending on your design.

3) POE will only work if there is a POE capable device connected. You can also use the "power inline never" command to prevent POE from ever being used.

Mark

1 REPLY

Re: 3560 PoE enabled switch

Here are the answers inline

1) Yes you can use BGP. You must run either IP services or advanced IP services IOS.

2) Shouldn't be a problem depending on your design.

3) POE will only work if there is a POE capable device connected. You can also use the "power inline never" command to prevent POE from ever being used.

Mark

423
Views
0
Helpful
1
Replies
СоздатьДля создания публикации, пожалуйста в систему