07-09-2008 07:56 PM - edited 03-03-2019 10:40 PM
Can you please confirm the operation of 8 port Cisco 3560 PoE enabled switch.
1> I want to run BGP protocol on this
2> I will connect two firewall on two diff port (Normal RJ45 without PoE enabled)
3> I don't require PoE , Can I disable PoE
Please confirm whether I do all the above things or not
Solved! Go to Solution.
07-09-2008 08:11 PM
Here are the answers inline
1) Yes you can use BGP. You must run either IP services or advanced IP services IOS.
2) Shouldn't be a problem depending on your design.
3) POE will only work if there is a POE capable device connected. You can also use the "power inline never" command to prevent POE from ever being used.
Mark
07-09-2008 08:11 PM
Here are the answers inline
1) Yes you can use BGP. You must run either IP services or advanced IP services IOS.
2) Shouldn't be a problem depending on your design.
3) POE will only work if there is a POE capable device connected. You can also use the "power inline never" command to prevent POE from ever being used.
Mark
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide