Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

3640 Xmodem Problem

Hello All,

In an attempt to install a 3640 series i encountered the following which hampered the installation, any help how how to go about it?.

Do not start the sending program yet...

File size Checksum File name

32031472 bytes (0x1e8c2f0) 0xd51f c3640-js-mz.124-13b (bad checksum: 0x37b9)

WARNING: All existing data in flash will be lost!

Invoke this application only for disaster recovery.

Do you wish to continue? y/n [n]: y

Ready to receive file c3640-jk9s-mz.124-16 ...

BB0

ERR:Image size exceeds free flash space

rommon 3 >

How can i make space available for the installation if that is the problem?.

Thanking you all in advance,

Regards

4 REPLIES

Re: 3640 Xmodem Problem

Looks like to need to remove any files for images from the flash, before you can copy the new image into it.

HTH>

Community Member

Re: 3640 Xmodem Problem

Hello,

Many thanks for your response. But if at all i have to remove any file from the flash, which is it and how do i go about it?

Thanks

Re: 3640 Xmodem Problem

Follow the below instructions - there is an option to erase the flash before the xmodem copy takes place.

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008009433b.shtml

HTH>

Community Member

Re: 3640 Xmodem Problem

Hi,

Sorry the link you sent does not contain solution to my problem. thanks any way.

Regards

177
Views
0
Helpful
4
Replies
CreatePlease to create content