01-23-2008 11:51 AM - edited 03-03-2019 08:23 PM
My 3660 (running 12.2(8)T5) is not bringing up more than 924 VCCs for some reason. The interface says 1023 maximum:
1023 maximum active VCs, 924 current VCCs
Any VCC I create further than that shows an end-to-end connection on the router and the far end, but the VCC status shows "INACTIVE."
Has anyone witnessed this behavior or am I missing something?
01-23-2008 02:08 PM
Hi, you might may be running into a "vci bits per vci" issue. Check if that applies to your config:
http://cisco.com/en/US/tech/tk39/tk48/technologies_tech_note09186a00801086c5.shtml
01-23-2008 02:30 PM
Thank you for the quick message, but unfortunately the vc-per-vp value doesn't apply, since the NM-1A-OC card has a fixed range of VPIs and VCIs. The maximum number of IDBs (1400) has not been reached yet either.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: