Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

3660 temp replacement

I need to replace a 3660, which has 8 fastethernent and 4 serial. I have a 3640 and have found 2 4 port eithernet cards and a 4 port serial card would this work. This is only for a shourt fix. I been told a 3662 may be a better option if so would card can I use.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: 3660 temp replacement

If you are referring to NM-4E and the NM-4T, then it should work fine on a 3640.

But with the NM-4E you are limited to 10Mbps per port

HTH

Narayan

1 REPLY

Re: 3660 temp replacement

If you are referring to NM-4E and the NM-4T, then it should work fine on a 3640.

But with the NM-4E you are limited to 10Mbps per port

HTH

Narayan

113
Views
0
Helpful
1
Replies