Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

3745 Router Memory Cards

How do I know if I have one 128 MB memory card or two 64 MB memory cards in a 3745 router without physically opening it up? Is there an IOS command that will tell me? Any tricks to finding this out from other commands?

4 REPLIES
Silver

Re: 3745 Router Memory Cards

Check here to determine if it works for you :

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_command_reference_chapter09186a00800ca742.html

You can try "sh flash: all" & "sh flash: chips". Please advise the result.

Hope this helps.

New Member

Re: 3745 Router Memory Cards

My co-worker next to me found the answer. It is 'show platform'. Gives you data on the Dimms in each slot, and if one is empty, it tells you so. Pretty handy for planning memory upgrades!

Silver

Re: 3745 Router Memory Cards

Hi Curtis

According to: http://www.cisco.com/en/US/products/hw/routers/ps282/prod_module_installation_guide09186a008007e3cb.html#wp168876

it has one 128 MB DIMM since two 64 MB DIMMs is a non allowed configuration.

Hope this helps

New Member

Re: 3745 Router Memory Cards

try Sh diag & sh ver for slot & memory info

geoff

www.simondirect.com

216
Views
0
Helpful
4
Replies
CreatePlease to create content