The 3750's act as one switch in stack formation. I have 3 switches stacked, and I have loaded the proper IOS on the first switch and as I begin to stack the switches the IOS is loaded to the 2 other switches as it should be. The problem is below:
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C3750-24TS 12.2(25)SEE2 C3750-IPBASEK9-M
2 26 WS-C3750-24TS 12.2(25)SEE2 C3750-IPBASE-M
3 26 WS-C3750-24TS 12.2(25)SEE2 C3750-IPBASE-M
Notice the IOS is all the same but only one has the K9 security features. Can someone tell me why this is? I need an answer ASAP and will rate. Thanks!!!!