Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3750 IOS trouble

The 3750's act as one switch in stack formation. I have 3 switches stacked, and I have loaded the proper IOS on the first switch and as I begin to stack the switches the IOS is loaded to the 2 other switches as it should be. The problem is below:

Switch Ports Model SW Version SW Image

------ ----- ----- ---------- ----------

* 1 26 WS-C3750-24TS 12.2(25)SEE2 C3750-IPBASEK9-M

2 26 WS-C3750-24TS 12.2(25)SEE2 C3750-IPBASE-M

3 26 WS-C3750-24TS 12.2(25)SEE2 C3750-IPBASE-M

Notice the IOS is all the same but only one has the K9 security features. Can someone tell me why this is? I need an answer ASAP and will rate. Thanks!!!!

1 REPLY

Re: 3750 IOS trouble

Friend,

Can you try loading the software from the existing Master to one of the stack memebers

archive copy-sw /destination-system

destination-stack-member-number /force-reload

source-stack-member-number

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12225see/scg/swiosfs.pdf

HTH, rate if it does

Narayan

152
Views
0
Helpful
1
Replies
CreatePlease to create content