I need to know urgently if the following scenario will work.
I have a layer 2 fibre based ethernet service from a Telco & they are presenting links on 1gb Fibre connections. At their POP, however, they will rate-limit to 10mb or 100mb. Therefore I need to ensure that I send out only to the appropriate limit. If I connect the fibre link to the Special Services GBIC of a 3750 Metro Switch, does this device have the capability to ensure the following:
1. The Switch will traffic-shape correctly send on it's link
2. The Switch can also shape further on a 100mb limited link when sending traffic to a 10mb site.
YOu would indeed need to use the 'enhanced services' ports on the 3750 to connect to the Telco. These ports support the Hierarchical Queueing Framework whereas the standard customer ports have only limited QoS capability.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.