Dear All
I am in process of upgrading 3750 stack switches using . bin image using TFTP server remotely.
The new image which is going to uploaed is already there in the TFTP server.
The stack switch has 3 memebers.
I am copying the . bin iamge from the TFTP server to flash file system of all the 3 switches
like
copy tftp falsh1:
copy tftp falsh2:
copy tftp falsh3:
then chaning the bootvaraible
#boot system switch all flash:/ name of ios file
then realod
could any one temm this procedure is correct and if it wrong please advice me on the same
regd
Srinivas