Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

3825 support for HWIC-2FE

I asked someone at Cisco about the number of HWIC-2FE cards supported by the 3825 (they said 4 - one in each HWIC slot). This seems to be contradicted by the HWIC data sheet - which says only 2 HWIC-2FE cards can be used in the 3825. Which number is correct? (2 cards [4 FE ports] or 4 cards [8 FE ports)? Thanks much!

2 REPLIES

Re: 3825 support for HWIC-2FE

Hi doug,

It should be used by all hwic slots.But when I saw this document then I would use only maximum 2 cards per chassis because the document say you can only have 6 layer3-FastEthernet ports.

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet0900aecd80581fe6.html

Thing is the HWIC-1FE and HWIC-2FE the minimum level is Cisco IOS 12.4(15)T.

It should be hardware limitation,I thought!

Hopes this helps

Thot

Cisco Employee

Re: 3825 support for HWIC-2FE

Hi Doug,

Below are your options on a Cisco 3825:

4 x 1-Port Fast Ethernet HWIC (ie. 1 to 4 HWIC-1FE may be installed in Slot 0 to slot 3)

OR

2 x 2-Port Fast Ethernet HWIC (ie. 1 to 2 HWIC-2FE may be installed in Slot 0 to slot 3)

Source:

http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/fe_hwic.html#wp1051838

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet0900aecd80581fe6_ps5853_Products_Data_Sheet.html

HTH,

~Vaibhav

1067
Views
0
Helpful
2
Replies
CreatePlease to create content