Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

3825 w hwic-4t1/e1 MPLS problem

On a 3825 with 4 hwic-4t1/e1 cards all is working well until we add a 4th or 4th and 5th line to our MPLS multilink bundle. We have 5 circuits, and any combination of 3 runs reliably. When we add another circuit the connection destablized resulting in route flapping on the entire network. We have 5 circuits bundled in two other locations on 2811s with 2 port cards. Only this router is having trouble.

1 REPLY
Hall of Fame Super Gold

Re: 3825 w hwic-4t1/e1 MPLS problem

Try loading the same IOS on the 3825 as the 2811.

If still troubles, you will have to contact the TAC and I recommend you ask for escalation right away.

249
Views
0
Helpful
1
Replies