Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

3845 and 2 T1's

Is it possible to "bond" 2 t1's on a 3845? Im not familiar with that type of configuration, so I ask. my router has IOS 12.3(11r)T2 currently. We already have 1 t1 up and operational, and I am adding another to help with the bandwidth issues we ahve.

3 REPLIES
Hall of Fame Super Silver

Re: 3845 and 2 T1's

Don

Probably the most effective way to bond the 2 T1s is to use multilink PPP (MLPPP). This takes multiple physical interrfaces and combines them in one virtual interface. It splits traffic evenly over the links.

This link has information that should help you get started:

http://www.cisco.com/en/US/tech/tk713/tk507/technologies_configuration_example09186a00800a3e98.shtml

HTH

Rick

New Member

Re: 3845 and 2 T1's

I agree with Richards response. Multlink PPP is the way to go!

New Member

Re: 3845 and 2 T1's

Thanks gents. I belive that will do me just fine.

113
Views
4
Helpful
3
Replies