Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3845 - GLC-SX-MM SFT LC Configuration

Running IOS 12.4 (15)T7. Installed SFT transceiver card, on console I'm seeing "Jun 18 14:36:14.511: %SBETH-6-SFP_IN: Interface GigabitEthernet0/0 1000BaseSX SFP has been inserted"

But on a sh run I'm only seeing the two copper intergated ports available

interface GigabitEthernet0/0

interface GigabitEthernet0/0

When the SFT card is inserted it seems to be using GigabitEthernet0/0 "Jun 18 14:36:14.511: %SBETH-6-SFP_IN: Interface GigabitEthernet0/0 1000BaseSX SFP has been inserted"

My question is when the SFT card in inserted can I then not use the intergated GIG port ???

Everyone's tags (5)
400
Views
0
Helpful
0
Replies
CreatePlease to create content