Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3925 SM-ES3G-16-P not recognized

We purchased an 3925 with a 16 port Gig SM module installed.

When I boot up router, those interfaces do not show up.

Do I have to do anything special to enable those interfaces to be seen on router.

(The 4th Gig interface show up as GI1/0, but I don't know where it is physicall located; possibly the SM Module itself ??)

Pertinent IOS information:

System image file is "flash0:c3900-universalk9-mz.SPA.150-1.M3.bin"

Cisco CISCO3925-CHASSIS (revision 1.1) with C3900-SPE100/K9 with 997376K/51200K bytes of memory.
Processor board ID FTX1434AJU9
4 Gigabit Ethernet interfaces
1 ATM interface
1 terminal line
1 Virtual Private Network (VPN) Module
DRAM configuration is 72 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
500472K bytes of ATA System CompactFlash 0 (Read/Write)


License Info:

License UDI:

-------------------------------------------------
Device#   PID                   SN
-------------------------------------------------
*0        C3900-SPE100/K9       FOC14314JJ5

Technology Package License Information for Module:'c3900'

----------------------------------------------------------------
Technology    Technology-package          Technology-package
              Current       Type          Next reboot
-----------------------------------------------------------------
ipbase        ipbasek9      Permanent     ipbasek9
security      securityk9    Permanent     securityk9
uc            None          None          None
data          None          None          None

Configuration register is 0x2102

Thanks for any help.

Tom

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: 3925 SM-ES3G-16-P not recognized

3 REPLIES
Hall of Fame Super Gold

Re: 3925 SM-ES3G-16-P not recognized

New Member

Re: 3925 SM-ES3G-16-P not recognized

Exactly what I was looking for.  Thanks. Tom

Hall of Fame Super Gold

Re: 3925 SM-ES3G-16-P not recognized

Thanks for the rating.

1680
Views
5
Helpful
3
Replies