3xT1 and MLPPP

[bfrericks]

Hello,

We are bonding 3 T's with MLPPP on a 2811 router. I am looking for any information on MLPPP configuration. From my understating we aren't doing anything but bonding those 3 T's. Can anyone point me to some documentation or possible provide me a generac config for MLPPP?

Thanks!

Blake Frericks

[jerry.mcrae · Accepted solution]

my config for two circuits to ISP.

interface Multilink80

bandwidth 3000000

ip address 4.x.x.x 255.255.255.252

no ip mroute-cache

no cdp enable

ppp multilink

ppp multilink fragment disable

ppp multilink group 80

interface Serial0/0

description Qwest Internet

no ip address

no ip redirects

no ip unreachables

encapsulation ppp

no ip mroute-cache

no fair-queue

no cdp enable

ppp multilink

ppp multilink group 80

interface Serial0/1

description Qwest Internet

no ip address

no ip redirects

no ip unreachables

encapsulation ppp

no ip mroute-cache

no fair-queue

no cdp enable

ppp multilink

ppp multilink group 80

[spremkumar]

Hi

In addition to Jerry's post do make sure that you have error free pipe available with you on your router so that you don't face any performance related issue after bonding them as a multilink interface.

regds