Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

4006 module issues

Hi All,

Console> (enable) show module
Mod Slot Ports Module-Type               Model               Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1   1    2     1000BaseX Supervisor      WS-X4013            no  faulty
3   3    48    Inline Power Module       WS-X4148-RJ45V      no  ok

Mod Module-Name          Serial-Num
--- -------------------- --------------------
1                        JAE0848159R
3                        JAE08512KV4

Mod MAC-Address(es)                        Hw     Fw         Sw
--- -------------------------------------- ------ ---------- -----------------
1   00-12-43-7c-02-00 to 00-12-43-7c-05-ff 7.0    6.1(5)     6.3(5)
3   00-12-d9-d2-9b-90 to 00-12-d9-d2-9b-bf 2.7

After 10 minutes the WS-x 4148 -rj45v goes offline.

what can be the reason?

3 REPLIES

Re: 4006 module issues

Looks like you have a faulty Supervior module, that would be why the other module goes offline, it need the supervisor to run.

Mike

Re: 4006 module issues

Hall of Fame Super Gold

Re: 4006 module issues

1   1    2     1000BaseX Supervisor      WS-X4013            no  faulty

Mike's right.  Your Sup is ... how do I say this, faulty.

152
Views
0
Helpful
3
Replies
CreatePlease to create content