I have a customer with 4006 switches at the head end site connecting to MPLS via fastEthernet port, and couple of branch sites with 384 kbps connections. They are experiencing QoS issues. I am planning on configuring LLQ and possibly LFI on the remote branch routers, and I wanted to find out what is the best option for configuring priority queuing on the 4006. Can outbound policy-map be applied to either the port or vlan?
You can configure transmit queue 3 on each port with higher priority using the priority high tx-queue configuration command in the interface configuration mode. When transmit queue 3 is configured with higher priority, packets in transmit queue 3 are scheduled ahead of packets in other queues.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.