Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

4503 QOS

Hi ALL:

Could any one tell me how to implement qos for voice on 45003 with sup IV IOS 12.2(37)SG1.

This 4503 have a direct 45Mb link connected to 6509.

The ip phones are not directly connected to the 4503.

Config on 4503 end:

interface GigabitEthernet2/9

no switchport

dampening

ip address x.x.x.x

no ip redirects

no ip unreachables

no ip proxy-arp

speed 100

duplex full

tx-queue 3

priority high

service-policy input pol_setprec

class-map match-all class_setprec

match access-group 110

policy-map pol_setprec

class class_setprec

police aggregate Pol_Voip_10mbps

set precedence 5

qos aggregate-policer Pol_Voip_10mbps 10 mbps 1 mbyte conform-action transmit exceed-action transmit

I am confused with command

tx-queue 3

priority high

and why service-policy input pol_setprec why not service-policy output pol_setprec

Chao

Vishwa

203
Views
0
Helpful
0
Replies