Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

4948 Swicch Config Register

Hi

we are using the two 4948 switch with two different IOS

existing one is cat4000-i9k91s-mz.122-25.EWA14.bin

but for OSPF and BGP we upgraded the IOS to cat4500-entservicesk9-mz.122-31.SG3.bin

now what is my worry is

for two IOS ther is some different Config registry

System image file is "bootflash:cat4500-entservicesk9-mz.122-31.SG3.bin"

cisco WS-C4948-10GE (MPC8540) processor (revision 5) with 262144K bytes of memory.

Processor board ID FOX1223GBKY

MPC8540 CPU at 667Mhz, Fixed Module

Last reset from Reload

10 Virtual Ethernet interfaces

48 Gigabit Ethernet interfaces

2 Ten Gigabit Ethernet interfaces

511K bytes of non-volatile configuration memory.

Configuration register is 0x102

-#- ED ----type---- --crc--- -seek-- nlen -length- ---------date/time--------- name

1 .. image 7EFB1824 C971CC 34 12939596 Jul 2 2008 14:55:17 +00:00 cat4000-i9k91s-mz.122-25.EWA14.bin

2 .. image 933B2DB1 1973BCC 39 13486464 Jun 24 2009 01:41:28 +00:00 cat4500-entservicesk9-mz.122-31.SG3.bin

34915380 bytes available (26426316 bytes used)

------------------------------------------

System image file is "bootflash:cat4000-i9k91s-mz.122-25.EWA14.bin"

Cisco WS-C4948-10GE (MPC8540) processor (revision 5) with 262144K bytes of memory.

Processor board ID FOX1224H08L

MPC8540 CPU at 667Mhz, Fixed Module

Last reset from PowerUp

5 Virtual Ethernet interfaces

48 Gigabit Ethernet interfaces

2 Ten Gigabit Ethernet interfaces

511K bytes of non-volatile configuration memory.

Configuration register is 0x2101

-#- ED ----type---- --crc--- -seek-- nlen -length- ---------date/time--------- name

1 .. image 7EFB1824 C971CC 34 12939596 Jul 2 2008 13:29:22 +00:00 cat4000-i9k91s-mz.122-

25.EWA14.bin

48401972 bytes available (12939724 bytes used)

why they are different can u suggest some one

1 REPLY
Cisco Employee

Re: 4948 Swicch Config Register

Vinoth,

The default is 0x2102. Please refer to the following URL for more information:

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a008022493f.shtml

Regards

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México 
Paseo de la Reforma 222 Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
6048
Views
0
Helpful
1
Replies