Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

6 x E1 IMA Bundle

We are planning the installation of a ATM IMA bundle of 6 x E1 in a Cisco3845 router. Due to the network module NM-8E1-IMA is EOL/EOS, Can I install two AIM-ATM-4T1= in order to build a 6 x E1s IMA Bundle?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: 6 x E1 IMA Bundle

No. It is not possible to have more than 4 circuits in IMA group on an ISR router.

The best you can do, is two groups with three circuits each, and CEF loadbalance the L3 interface.

2 REPLIES
Hall of Fame Super Gold

Re: 6 x E1 IMA Bundle

No. It is not possible to have more than 4 circuits in IMA group on an ISR router.

The best you can do, is two groups with three circuits each, and CEF loadbalance the L3 interface.

New Member

Re: 6 x E1 IMA Bundle

Thanks, that is a good solution.

154
Views
0
Helpful
2
Replies