Is it possible to use a 7600-SIP-200/400 on a 6500 switch? I want to configure QoS (CBWFQ, WRED, LFI, LLQ) on this box. I tried using the GigEthernet but it could not accept my policy when i tried to apply it on the physical and virtual (Vlan) interface. Is there a way I can realize this goal.
I tried to insert the SIP-200 on slot 7 but I got this errors message when it boot.
*Sep 15 09:18:42.375: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 7, power not allowed: The image for the card is not bundled in image.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...