Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

6509 Sup7203BXL Error

Hi,

Has anyone of you seen this error? I tried to use Cisco Output

Interpreter but haven't seen any information about the error. Thanks.

000747: Aug 29 20:16:10.000 UTC: %DUMPER-3-PROCINFO: pid = 16426:

(sbin/udp.proc), terminated due to signal SIGSEGV, Segmentation

violation (Address not mapped)

000748: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426:

zero at v0 v1

000749: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426: R0

00000000 7228D517 00000000 00000000

000750: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426:

a0 a1 a2 a3

000751: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426: R4

0106136C 01061358 000007E9 0000402A

000752: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426:

t0 t1 t2 t3

000753: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426: R8

00000000 00000001 00000004 00000001

000754: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426:

t4 t5 t6 t7

000755: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426: R12

CDD182FC D05155F1 FF000000 00000000

000756: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426:

s0 s1 s2 s3

000757: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426: R16

00000000 00F71930 01061358 00F71948

000758: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426:

s4 s5 s6 s7

000759: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426: R20

01061340 6C0BA940 7C263170 01061138

000760: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426:

t8 t9 k0 k1

000761: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426: R24

7264CCA4 76117C90 00000000 00000000

000762: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426:

gp sp s8 ra

000763: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426: R28

7C5715E0 00F718F0 00F71918 7646AFF4

000764: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426:

sr lo hi bad

000765: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426: R32

1000FC73 00000000 00000000 0000010C

000766: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426:

cause pc epc

000767: Aug 29 20:16:10.000 UTC: %DUMPER-3-REGISTERS_INFO: 16426: R36

00800008 7646B038 00000000

000768: Aug 29 20:16:10.000 UTC: %DUMPER-3-TRACE_BACK_INFO: 16426:

(s72033_rp-adventerprisek9_

wan-64-dso-p.so+0x2038)

(s72033_rp-adventerprisek9_wan-51-dso-p.so+0x10324)

(s72033_rp-adventerprisek9_wan-51-dso-p.so+0x16100) (libc.so+0x48204)

(libc.so+0x47EC4) (s72033_rp-adventerprisek9_wan-1-dso-p.so+0x5B64)

(s72033_rp-adventerprisek9_wan-1-dso-p.so+0x5B04)

(s72033_rp-adventerprisek9_wan-1-dso-p.so+0x507C)

(s72033_rp-adventerprisek9_wan-1-dso-p.so+0x397C)

(s72033_rp-adventerprisek9_wan-1-dso-p.so+0x3F48) (libc.so+0x252D4)

(libc.so+0x127AC)

000769: Aug 29 20:16:11.000 UTC: %DUMPER-3-CRASHINFO_FILE_NAME: 16426:

Crashinfo for process sbin/udp.proc at

bootflash:/crashinfo_udp.proc-20080829-201610

000770: Aug 29 20:16:11.000 UTC: %DUMPER-6-BAD_PATH: 16426: Choice 1

either not configured or bad path. Trying next choice.

000771: Aug 29 20:16:11.000 UTC: %DUMPER-6-BAD_PATH: 16426: Choice 2

either not configured or bad path. Trying next choice.

000772: Aug 29 20:16:11.000 UTC: %DUMPER-6-BAD_PATH: 16426: Choice 3

either not configured or bad path. Trying next choice.

000773: Aug 29 20:16:12.000 UTC: %DUMPER-3-DUMP_FAILURE: 16426: Core

dump failed: Could not create core

000774: Aug 29 20:16:12.000 UTC: %SYSMGR-3-ABNORMTERM: udp.proc:1 (jid

98) abnormally terminated, restart scheduled

000775: Aug 29 20:16:13.000 UTC: %SYSMGR-6-RESPAWN: Process udp.proc:1

has been respawned

Regards,

John

4 REPLIES
Hall of Fame Super Silver

Re: 6509 Sup7203BXL Error

Hello John,

the tool to be used should be the error message decoder but it doesn't provide any answer.

I haven't found any ref in the error and system messages guide for release 12.2SX.

I can say that these messages have been written by a process DUMPER that is trying to create a core dump just after a crash.

An error occurred during this process and so a detailed list of steps is provided.

000747: Aug 29 20:16:10.000 UTC: %DUMPER-3-PROCINFO: pid = 16426:

(sbin/udp.proc), terminated due to signal SIGSEGV, Segmentation

violation (Address not mapped)

000773: Aug 29 20:16:12.000 UTC: %DUMPER-3-DUMP_FAILURE: 16426: Core

dump failed: Could not create core

the overall result is that the core dump could not be created.

Hope to help

Giuseppe

Re: 6509 Sup7203BXL Error

Hey thanks for the reply. So what's this? Is this a hardware or software issue? Can this be resolved by updating the Cisco IOS? Thanks.

Hall of Fame Super Silver

Re: 6509 Sup7203BXL Error

Hello John,

the core dump is written when a crash happens.

I think this is a software issue you can think of an IOS upgrade.

Hat it happened only once or more times ?

Hope to help

Giuseppe

Re: 6509 Sup7203BXL Error

It just happened once. Thanks for the reply Giuseppe. =)

Regards,

John

412
Views
0
Helpful
4
Replies