Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

7200 local switching interworking between Ethernet Vlan to ATM

I want to bridge traffic between ATM interface to Ethernet interface on Cisco7200 as show in attached file. What I want to do in this case is they want to have PVC between 7600 to 2811 . But on the 7600 side is the FEthernet VLAN 802.1q connect to 7200(is the xconnect tranparent bridge) . On the other side 2811 is the CPE connected to FR/ATM network.

I'm trying to think of the best simple way to do this . One of an idea is , Can I use 7200 to perform like SP PE router and do L2VPN local switching on that box ? But I'm not sure if it will work or not. My question is .

1. Can we do local switching on 7200 with L2 interworking between Ethernet VLAN and ATM PVC ?

2. Do we need to configure MPLS or L2TPv3 in this case since there is no MPLS network ?

3. Which IOS is required on 7200?

Or if you have any other suggestion to make the point to point configuration on 7600 to 2811 , please advise.

Thank in advance.

1 REPLY
New Member

Re: 7200 local switching interworking between Ethernet Vlan to A

This is a same proplem :

I'm trying to get the ATM to ethernet VLAN local switching working properly.

What I'm trying to achieve is to connect a Cisco 828 over an SDSL line using

a VP/VC that terminates on a Cisco 7200. This VC is then connected at layer

2 on the 7200 to a VLAN, which eventually terminates on a Cisco2621.

Physical view:

828 ____SDSL ____ ATM ____ 7200 ____VLAN____ 2621

router DSLAM cloud router router

I can get the 828 to talk to the 7200 at layer 3 no problem, but what I'm

trying to do is get the 828 to see the 2621 as being directly connected at

layer 3 (i.e. the 7200 is transparent). Here is the logical (layer 3) view:

828 ____ 2621

router router

The config I'm trying to use is the following under the fastethernet

sub-interface:

connect connection-name interface pvc interface interworking

interworking-type

This is described in more detail here:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1829/products_feature_guid

e09186a00801ea88d.html#wp1110021

I'm not having any joy getting this working, so I was wondering whether any

of you have had any experience with this and can help me out?

The 7200 is a 7206VXR running IOS 12.2(25)S1.

Thanks in advance,

Reference url from : http://www.atm.tut.fi/list-archive/nanog/msg36781.html

235
Views
0
Helpful
1
Replies